Protokół numer 412

• How to Read (click here for more information)

  ● Temic DQ200 ECU (klknij tutaj, aby uzyskać instrukcje dotyczące połączenia)

  1. Connect the tool to your computer;
  2. Connect to the Gearbox ECU using the DSG cable 144300K254:
     DSG 25-pin cable for TEMIC DQ200 ECUs
     144300K254
     
     
     
  3. Attach the alligator clips of the cable to the vehicle battery or a regulated power supply.
     Note: If the red LED on the cable switch is not lit, the ECU is not getting power. Check the power source and make sure you have properly connected the clamps.
  4. Read the gearbox ECU. Note: When asked to turn the ignition switch to on/off, act on the switch of the DSG cable.

  ---

  ● Temic DQ250 ECU (klknij tutaj, aby uzyskać instrukcje dotyczące połączenia)

  1. Connect the tool to your computer;
  2. Connect to the vehicle's diagnostic socket using the OBDII Standard cable 144300KCAN;
  3. Get the ID infofrom the gearbox ECU;
  4. Connect to the Gearbox ECU according to the instructions provided for each model (klknij tutaj, aby uzyskać instrukcje dotyczące połączenia);

     ♦ Hardware number equal to 02E927770AE (klknij tutaj, aby uzyskać instrukcje dotyczące połączenia)

     1. Keep the cable OBDII Standard 144300KCAN connected;
     2. Read the Gearbox ECU.

     ♦ Hardware number NOT equal to 02E927770AE (klknij tutaj, aby uzyskać instrukcje dotyczące połączenia)

     1. Unplug the cable OBDII Standard 144300KCAN;
     2. Connect to the Gearbox ECU using the DSG cable 144300K253:
        DSG 20-pin cable for TEMIC DQ250 ECUs
        144300K253
        
        
        
     3. Attach the alligator clips of the cable to the vehicle battery or a regulated power supply.
        Note: If the red LED on the cable switch is not lit, the ECU is not getting power. Check the power source and make sure you have properly connected the clamps.
     4. Read the gearbox ECU. Note: When asked to turn the ignition switch to on/off, act on the switch of the DSG cable.

     ---



• How to Write (click here for more information)

  ♦ Writing/Getting ID info with a DSG cable (click here for more information)

  1. Connect the tool to your computer;
  2. Connect to the Gearbox ECU using the DSG cable suggested for each model (klknij tutaj, aby uzyskać instrukcje dotyczące połączenia);

     ● Temic DQ200 ECU (klknij tutaj, aby uzyskać instrukcje dotyczące połączenia)

     DSG 25-pin cable for TEMIC DQ200 ECUs
     144300K254
     
     

     ---

     ● Temic DQ250 ECU (klknij tutaj, aby uzyskać instrukcje dotyczące połączenia)

     DSG 20-pin cable for TEMIC DQ250 ECUs
     144300K253
     
     

     ---

  3. Attach the alligator clips of the cable to the vehicle battery or a regulated power supply.
     Note: If the red LED on the cable switch is not lit, the ECU is not getting power. Check the power source and make sure you have properly connected the clamps.
  4. Read the gearbox ECU. Note: When asked to turn the ignition switch to on/off, act on the switch of the DSG cable.

  ♦ Writing/Getting ID info with Standardowy kabel OBD2 (click here for more information)

  1. Connect to the vehicle's diagnostic socket using the OBDII Standard cable 144300KCAN;
  2. Get the ID info or Write the gearbox ECU.